Programming Instructions is in your owner's manual.
You will need 2-working keys to program additional keys, Otherwise
You will need to find a local automotive locksmith to program this Key.
This Transponder Key Will Not Work With Push To Start Vehicles.
Programming Instructions:
You must have two working programmed keys
the new key needs to be cut by a locksmith or a dealer prior to performing programming procedure.
Insert the first programmed key into the ignition
Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds
Switch the ignition off and remove the first Programmed key from the ignition
After 2 seconds but within 10 seconds of switching the ignition off, insert the second Programmed key into the ignition
Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds
Switch the ignition off and remove the second previously programmed coded key from the ignition
After 3 seconds but within 10 seconds of switching the ignition off, insert the new unprogrammed key into the ignition
Switch the ignition from off to on. Keep the ignition on for at least six seconds
Remove the newly programmed key from the ignition
